Recessed luminaires Arimo Fit C Prisms White ET 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 7528740

Item condition	New
Manufacture name	Recessed luminaires Arimo Fit C Prisms White ET 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 7528740
Brand	TRILUX
Categories	Wall and ceiling luminaires
Country of origin	DE
Colour housing	Other
Colour rendering index CRI	20-39
Lamp type	Other
Impact strength	IK00
Degree of protection (IP)	Other
Beam angle	Open beam/diffuse

Packing level 1	4018242524464, 4018242524464
Packing level 2	4018242810802

Protection class	None
Lamp holder	Other
Connection type	Other
Voltage type	AC
Type of grid	Other
Type of control gear	Electronic transformer
Housing material	Other
Light outlet	Direct
Light sharing	Asymmetric
Material cover	Other
Colour of light	Other
Type of wiring	Suitable for through wiring
Colour consistency (McAdam ellipse)	SDCM1
Photobiological safety according to EN 62471	Other
Degree of protection (NEMA)	Other
Filament test according to IEC 60695-2-11	None
Light distributor	Other
Energy efficiency class of the built-in lamp	Other
Energy efficiency class of the provided exchangeable built-in lamp	A
Highest energy efficiency class of the exchangeable lamp	A
Lowest energy efficiency class of the exchangeable lamp	A
Colour temperature adjustable	No
Luminous flux adjustable	No
Beam angle adjustable	No
Surface protection housing	Other

Square recessed LED luminaire with microprismatic cover PW. Version M73 (600 mm x 600mm). Optionally, the luminaire can be equipped with an emergency light system for ceiling recessing with an emergency light operation time of 3 hours. In emergency light operation, the luminaire luminous flux is 575 lm. Generation of an enhanced depth effect in the room. For system ceilings with exposed grids. The luminaire body is flush with the ceiling system on the room side. The Sky frame, optionally available as an accessory, creates a room-atmospheric depth effect in the classic, flat modular ceiling; the 3-dimensional contour of a skylight is reproduced. The optical system consists of a highly efficient PMMA cover with microprisms. The microstructured PMMA prism surface of the optical system has a glare-reducing effect, is non-yellowing and does not cloud. With symmetric limited wide light distribution. Glare evaluation according to UGR rating (EN 12464-1) < 19. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 3000 cd/2 for beam angle above 65° all-round. Harmonious light effect due to homogeneously illuminated light emission. Individual design of the light emission surface (e.g. with printing) and other special solutions are possible on request. Luminaire luminous flux and light color fixed. Luminaire luminous flux 4200 lm, connected load 31 W, maximum luminous efficiency of luminaire 135 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 100,000 h, mean rated service life L90(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Luminaire body of extruded aluminium profile. Surface coated white (RAL 9016). Luminaire dimensions (L x W x H): 596 mm, 596 mm, 22 mm. The narrow side profile is flush with the trunking. The luminaire frame is profiled in a 3-dimensional way to generate a depth effect on the ceiling. Luminaire can be covered with insulatin material at ta 25°C, ta35 °C without insulation materila can be also be used. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP20, Protection rating on room side: IP40, impact resistance level in accordance with IEC 62262: IK03, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 3,4 kg. Polarity-protected rapid connection with mains through-wiring up to Ø 2.5 mm2. Connection of the ballast unit to the luminaire (Plug ‘N Play). The luminaire’s packaging concept facilitates separate removal of the control gear unit for pre-assembly, leaving the remaining luminaire components protected until final assembly. With external operating device, switchable. The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Control gear unit is open-circuit proof and protected against faulty connection, short circuit, overload and overtemperature. Output ripple of the control gear unit ≤ 4 % for effective control of the LED system and for flicker-free light. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority. The luminaire is part of a range of recessed, surface-mounted and suspended luminaires with a harmonised appearance. The application variety of the product series is underlined by variants regarding luminous flux packages, light distribution curves and protection ratings. On request, the basic range can be expanded with project-specific luminaire features. Luminaire available for 10 years, spare parts (LED module, control gear unit, optical system) for 15 years from date of invoice, subject to reasonable modifications in the interests of progress.