***Reflex iC60N 3P C 25A, 24, 10kA

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

195,19 €

This price is valid until 03.01.25

EAN: 3606480455650

MPN: A9C62325

Package: 1

Box: 14

Technical Information

Item condition	New
Manufacture name	***Reflex iC60N 3P C 25A, 24, 10kA
Brand	Schneider Electric
Categories	Breakers
Country of origin
Harmonized System Code	8536 2010 00
Voltage type	AC
Built-in depth	44.5 mm
Rated current	25 A
Rated voltage	415 V
Release characteristic	C
Number of poles	3
Current limiting class	0
Over voltage category	4
Pollution degree	3
Width in number of modular spacings	5.5
Degree of protection (IP)	IP20
Concurrently switching neutral conductor	No
Rated short-circuit breaking capacity according to EN 60898	0 kA
Rated short-circuit breaking capacity according to IEC 60947-2	10 kA
Rated switch current auxiliary device	1 A
Rated voltage auxiliary device	230 V
Control voltage type auxiliary equipment	AC
Additional equipment attached at delivery	Remote drive

Packing details

Packing level 1	3606480455650
Packing level 2	3606480455658

Description

This Acti 9 Reflex iC60N is a low voltage integrated control circuit breaker. It is a 3P circuit-breaker with 3 protected poles, 25A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. Its width is 11 modules of 9mm. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 220VAC to 240VAC, and 10kA at 380VAC to 415VAC. As circui-breaker, it protects circuits against short circuit and overload currents, disconnection in the industrial sector. It can control a device remotely by latched and/or impulse-type order according to the 3 operating modes to be chosen by the user. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. Resetting after a fault is performed manually by the resetting handle. The Ti24 interface allows direct interfacing of the Reflex iC60 with a PLC. It allows to execute remote control, to indicate the state of the control circuit and circuit-breaker state information, to connect it to the Acti 9 Smartlink thanks to the prefabricated cables.