Register to unlock your exclusive B2B prices and start shopping. Sign up now!
MD01 image 1

Residual current protection relay, VigiPacT RH197P, 30mA-30A, 48VAC 50/60Hz, 24/130VDC, alarm 50%, front panel mounting

In stock: No Vendor stock: No Minimal order quantity: 1
Price (excl. VAT):
286,16 €
This price is valid until 24.12.24
EAN: 3303430565055
MPN: 56505
Package: 1
Box: 24

Technical Information

Item condition New
Manufacture name Residual current protection relay, VigiPacT RH197P, 30mA-30A, 48VAC 50/60Hz, 24/130VDC, alarm 50%, front panel mounting
Brand Schneider Electric
Categories Relays
Country of origin IT
Width 72 mm
Function For three-phase supply system
Height 72 mm
Depth 92 mm
Rated frequency 50-60 Hz
With detachable clamps No
Error registration possible No
Indication of difference current No
Type of electric connection Clip connection
Rated voltage 24-130 V
Rated control supply voltage at AC 50 Hz 12-24 V
Rated control supply voltage at AC 60 Hz 12-24 V
Rated control supply voltage at DC 24-130 V
Max. permitted delay-on energization time 4.5 s
Min. adjustable delay-on energization time 0 s
Response value amperage 1 0-30 mA
Response value amperage 2 0-30000 mA
Voltage type for actuating AC
Number of contacts as normally closed contact 1
Number of contacts as normally open contact 1
Number of contacts as change-over contact 1

Packing details

Packing level 1 3303430565055
Packing level 2 3303430565053

Downloads

Description

VigiPacT RH197P is a front panel mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 48VAC 50/60Hz, or 24/130VDC. It is a type A earth-leakage protection class. The current sensitivity is selectable with 19 thresholds from 30 mA to 30 A. The time delay is selectable with 7 settings from instantaneous to 4.5s. The alarm is set by Dip switch at 50% of IDn. A switch make the selection between local manual reset or automatic reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a front panel switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.