Residual current protection relay, VigiPacT RH99M, 30mA-30A, 380/415VAC 50/60Hz, DIN rail mounting
In stock price (excl. VAT):
175,64 €
This price is valid until 2024-12-24
Price per m:
175,64 €
EAN: 3303430561743
MPN: 56174
Our warehouse:
No
Vendor stock:
No
Per package:
1
Per box:
36
Per pallet:
N/A
Technical data
| Item condition | New |
| Brand | Schneider Electric |
| Categories |
Relays |
| Country of origin | FR |
| Width | 54.000 mm |
| Function | For three-phase supply system |
| Height | 97.000 mm |
| Depth | 74.000 mm |
| Rated frequency | 50.000-60.000 Hz |
| With detachable clamps | No |
| Error registration possible | No |
| Indication of difference current | No |
| Type of electric connection | Screw connection |
| Rated voltage | 380.000-415.000 V |
| Rated control supply voltage at AC 50 Hz | 380.000-415.000 V |
| Rated control supply voltage at AC 60 Hz | 380.000-415.000 V |
| Max. permitted delay-on energization time | 4.500 s |
| Min. adjustable delay-on energization time | 0.000 s |
| Response value amperage 1 | 0.000-30.000 mA |
| Response value amperage 2 | 0.000-30000.000 mA |
| Voltage type for actuating | AC |
| Number of contacts as normally closed contact | 1.000 |
| Number of contacts as normally open contact | 1.000 |
| Number of contacts as change-over contact | 1.000 |
Packing details
| Packing level 1 | 3303430561743 |
| Packing level 2 | 3303430561741 |
Downloads
ECOP (Environmental Code of Practice)
Declaration EPD (Environmental Product Declaration)
Technical manual
Description
VigiPacT RH99M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 380/415VAC 50/60Hz. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.