RF PB sens. 1-g KNX

Item condition	New
Brand	Gira
Categories	Sensors
Country of origin	DE
Harmonized System Code	8536 5011 00
Mounting method	Flush mounted (plaster)
Colour	Other
Surface protection	Other
With display	No
With IR sensor	No
With room temperature controller	No
Material quality	Other
Bus system KNX	Yes
Bus system radio frequent	No
Bus system Powernet	No
With bus connection	No
Material	Other
Number of buttons	1
Other bus systems	None
Bus system LON	No
With anti-theft/dismantling protection	No
RAL-number (similar)	0
With label area	No
Degree of protection (IP)	IP20
With LED indication	Yes
Transparent	No
Number of actuation points	1
Bus system KNX radio	Yes
Radio frequent bidirectional	-
Min. depth of built-in installation box	0 mm

Packing level 1

4010337017240

RF pushbutton sensor, 1-gang for KNX System 55 Start-up rocker The RF pushbutton sensors for KNX transmit KNX telegrams wirelessly when the button is pressed, depending on the parameter settings when the application program is loaded. These could be e.g. telegrams for switching pressing, for dimming or blind control. It is also possible to program encoder functions (dimming encoders and scene auxiliary units). Features: Confirmation function as well as transmit and status display via two-colour LED (red green) separately for each button by 2-stage display function. Optional status display by separate 1-bit status communication objects. Transmit and confirmation display deactivatable. The pushbutton sensor can be attached to walls using screws or affixed to smooth or transparent surfaces using a mounting plate. Project planning, start-up and parameter setting are performed using ETS (version 5 or later). Battery-operated device. "Switching" function: Rocker or button function. Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no reaction). "Dimming" function: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (lighter - ON, darker - OFF). "Blind" function: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (ON, OFF, CHANGE). Time between short and long-term command can be set in the parameters. "Value transmitter" and "Scene auxiliary unit" functions: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (values 0 to 255, 0 to 100% or scene number). With scene auxiliary unit: Memory function possible. Notes : Batteries are consumables and must be replaced regularly. Please observe the regulations on the disposal of used batteries. The pushbutton sensor is supplied with a program-neutral start-up rocker. The suitable rocker set for the design line must be ordered separately. The range can be reduced when using rocker sets and or cover frames.