VZ208E Zone Valve, 2-Way, PN16, DN15, G1/2 External Thread, Kvs 1.0 m³/h, M30 Actuator Connection, 2.5 mm Stroke, Stem Up Closed

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

24,35 €

This price is valid until 24.12.24

EAN: 3606481819932

MPN: VZ208E-15BP04

Package: 1

Technical Information

Item condition	New
Manufacture name	VZ208E Zone Valve, 2-Way, PN16, DN15, G1/2 External Thread, Kvs 1.0 m³/h, M30 Actuator Connection, 2.5 mm Stroke, Stem Up Closed
Brand	Schneider Electric
Categories	Mounting materials
Country of origin	IT
Width	97 mm
Height	58 mm
Depth	0 mm
Control signal	Two-point
Material quality	Dezincification resistant brass (DZR)
Frequency	50/60 Hz
Article compression class	PN 16
Max. medium temperature (continuous)	95 °C
Min. medium temperature (continuous)	5 °C
Outer pipe diameter all connections	15 mm
Flange compression class	PN 16
Length of connection 1	0 mm
Length of connection 2	0 mm
Working length connection 1	0 mm
Working length connection 2	0 mm
Operating time	0 s
Housing material	Brass
Kvs value	1
Connections	Other
With end contacts	No
Max. electric power input	0 VA
Nominal diameter	1/2 inch (15)
Auxiliary contacts	No
Max. pressure difference in opened position	16 bar
Leakage loss of Kvs value	0.005 %
Control ratio (Svo)	0 %
Characteristic curve	Linear
Closing pressure	0 bar

Packing details

Packing level 1

3606481819932

Downloads

ECOP (Environmental Code of Practice) Declaration EPD (Environmental Product Declaration) Technical manual

Description

The VZ28 is a short stroke and small linear zone valve designed for control of hot and chilled water. The valve is used with a thermo-electric actuators type MZ14. The valves utilise a double O-ring design on the plug to ensure a leak tight seal on both valve ports, this ensures no loss of energy leakage through the valve. It is a BSP male threaded valves with flat face seals, a range of connection sets are available to mate onto pipe. Multipacks are not available. Two-way valve, Normally closed without actuator fitted. Pressure class PN16, stroke 2.5 mm. It is recommended to fit a strainer upstream of the valve to increase reliability and to follow water treatment guidelines as detailed in VDI 235. Valves should be installed in the return pipe to reduce exposure to media temperature extremes.