ARGUS AANW.MELDER,INB.,360GR.,1-10 V

Item condition	New
Manufacture name	ARGUS AANW.MELDER,INB.,360GR.,1-10 V
Brand	Schneider Electric
Categories	Sensors
Country of origin	EE
Harmonized System Code	8536 5080 00
Mounting method	Other
Colour	White
Width	116 mm
Model	Presence detector
Height	116 mm
Depth	72 mm
Connection type	Screwed terminal
Frequency	50-60 Hz
Max. transmission range frontally	7 m
Max. switching power	2200 W
Scan angle	360 °
Degree of protection (IP)	IP20
Min. switch-on time	10 s
Max. duty cycle	30 min
Response value luminosity adjustable	Yes
Max. switching power LED	0 W
Sensor type	Passive infrared

Packing level 1

3606480467431

Halogen free	Yes
Surface protection	Untreated
Creep-under protection	Yes
Voltage type	AC
Switching-on delay	0 s
Switch-off delay	1800 s
Built-in depth	0 mm
With remote control	Yes
Diameter	0 mm
Built-in width	0 mm
Built-in diameter	0 mm
Staircase monitoring	Yes
Bridging switch	No
Suitable for wireless transmission	No
Material quality	Thermoplastic
Max. transmission range sideways	7 m
Temperature	0-25 °C
Max. starting current	10 A
Material	Plastic
Response value sensitivity adjustable	No
Dim function with dimmer basic element	No
Response value luminosity	10-1000 lx
Suitable for C-load	Yes
Diameter detection range on floor	14 m
Remote operation	Yes
HVAC-control	No
Constant light control	Yes
Substation input	No
RAL-number (similar)	9010
With signal unit	No
Control current	50 mA
Teach-function for response value luminosity	No
Networkable	Yes
Forced switch off	No
Built-in length	0 mm
Impact strength	IK02
With alarm function	No
Transparent	No
Animal zone	No
Surface finishing	Glossy
Detection angle horizontal	0-360 °
Suitable for wall mounting	No
Optimum mounting height	2.5 m
Number of switching zones	136
With DALI interface	No
Forced switch on	No
Min. starting current	0 A
Min. depth of built-in installation box	0 mm
Max. presence range	113 m²
Suitable for ceiling mounting	Yes
Anti-bacterial treatment	No

Presence detector for ceiling mounting indoors. The sensor module detects moving heat sources (e.g. people) within an adjustable area of detection and starts a staircase timer. For fluorescent lamps with electronic ballast or electronic transformer with 1-10 V interface. The sensor module is equipped with a light sensor with an adjustable brightness threshold so that the lighting is only switched on when a specified brightness threshold is not met. When there is sufficient natural light, the presence function allows the sensor module to switch off the lighting even when a person is present. The switchable light control ensures that the room illumination remains almost constant. The sensor module continuously measures the brightness in the room and adjusts the illumination to an adjustable setpoint. For mounting in a size 60 flush-mounted socket or in the surface-mounted housing available as an accessory. With claw and screw fixing. With screw terminals. Functions: Switching and dimming of one output. External triggering via one PL-input (Slave, Side controller Plus). Memory function. Brightness dependent staircase lighting function, light control. Nominal voltage: AC 220/230 V, 50/60 Hz. Nominal current: max. 10 A, cos Phi 0.6. Control current: max. 50 mA. Load type: max. 25 controllable EBs (1-10 V). Outputs: 1 x make contact, 1x (1-10 V). Max. switching capacity: Incandescent lamps: 2200 W. HV halogen lamps: 2000 W. LV halogen lamps with wound transformer: 500 VA. Electronic transformers: 1050 W. Capacitive load: 10 A, 140 µF. Neutral conductor: required (3 conductor system). Wire range: max. 2x2.5 mm². Angle of detection: 360°. Number of levels: 6. Number of zones: 136. Number of movement sensors: 4. Recommended installation height: 2.5 m. Range: a radius of max. 7 m (at an installation height of 2.50 m). Sensitivity: continuously adjustable. Brightness threshold: continuously adjustable between approx. 10 and 1000 lux. Overshoot time: Channel 1: continuously adjustable between approx. 10 s and approx. 30 min. Colour: polar white.