ARGUS Presence Master with IR, relay 2-gang, polar white

Item condition	New
Manufacture name	ARGUS Presence Master with IR, relay 2-gang, polar white
Brand	Schneider Electric
Categories	Sensors
Country of origin	EE
Mounting method	Other
Colour	White
Width	116 mm
Model	Presence detector
Height	116 mm
Depth	72 mm
Connection type	Screwed terminal
Frequency	50-60 Hz
Max. transmission range frontally	7 m
Max. switching power	2200 W
Scan angle	360 °
Degree of protection (IP)	IP20
Min. switch-on time	10 s
Max. duty cycle	30 min
Response value luminosity adjustable	Yes
Max. switching power LED	0 W
Sensor type	Passive infrared

Packing level 1	3606480467424
Packing level 2	3606480467422

Halogen free	Yes
Surface protection	Untreated
Creep-under protection	Yes
Voltage type	AC
Switching-on delay	0 s
Switch-off delay	1800 s
Built-in depth	30 mm
With remote control	No
Diameter	116 mm
Built-in width	60 mm
Built-in diameter	60 mm
Staircase monitoring	Yes
Bridging switch	No
Suitable for wireless transmission	No
Material quality	Thermoplastic
Max. transmission range sideways	7 m
Temperature	0-25 °C
Max. starting current	14 A
Material	Plastic
Response value sensitivity adjustable	Yes
Dim function with dimmer basic element	No
Response value luminosity	10-1000 lx
Suitable for C-load	No
Diameter detection range on floor	14 m
Remote operation	Yes
HVAC-control	No
Constant light control	No
Substation input	Yes
RAL-number (similar)	9010
With signal unit	No
Control current	0 mA
Teach-function for response value luminosity	No
Networkable	Yes
Forced switch off	No
Built-in length	60 mm
Impact strength	IK02
With alarm function	No
Transparent	No
Animal zone	No
Surface finishing	Glossy
Detection angle horizontal	0-360 °
Suitable for wall mounting	No
Optimum mounting height	2.5 m
Number of switching zones	136
With DALI interface	No
IFTTT support available	No
Forced switch on	No
Min. starting current	0 A
Min. depth of built-in installation box	46 mm
Max. presence range	113 m²
Compatible with Apple HomeKit	No
Compatible with Google Assistant	No
Compatible with Amazon Alexa	No
Suitable for ceiling mounting	Yes
Anti-bacterial treatment	No

Presence detector for ceiling mounting indoors. The sensor module detects moving heat sources (e.g. people) within an adjustable area of detection and starts a staircase timer. For ohmic, inductive and capacitive loads such as incandescent lamps, energy-saving lamps, LV halogen lighting with conventional transformer, electronic transformers, fluorescent lamps. The sensor module is equipped with a light sensor with an adjustable brightness threshold so that the lighting is only switched on when a specified brightness threshold is not met. When there is sufficient natural light, the presence function allows the sensor module to switch off the lighting even when a person is present. For mounting in a size 60 flush-mounted socket or in the surface-mounted housing available as an accessory. With claw and screw fixing. With screw terminals. Functions: Switching of two outputs. External triggering via two PL-inputs (Sensor module on central unit insert (Slave), Side controller Plus). Switching. Brightness-dependent staircase lighting function with channel 1, staircase lighting function independent of brightness with channel 2. Nominal voltage: AC 220/230 V, 50/60 Hz. Nominal current: max. 10 AX, cos Phi 0.6. The total load on both channels is not allowed to exceed 14 A. Outputs: 2 x make contacts. Max. switching capacity per channel: Incandescent lamps: 2200 W. HV halogen lamps: 2000 W. LV halogen lamps with wound transformer: 500 VA. Electronic transformers: 1050 W. Capacitive load: 10 A, 140 µF. Energy-saving lamps: 100 VA. Motor load: 1000 VA. Neutral conductor: required (3 conductor system). Wire range: max. 2x2.5 mm². Angle of detection: 360°. Number of levels: 6. Number of zones: 136. Number of movement sensors: 4. Recommended installation height: 2.5 m. Range: a radius of max. 7 m (at an installation height of 2.50 m). Sensitivity: continuously adjustable. Brightness threshold: continuously adjustable between approx. 10 and 1000 lux. Overshoot time: Channel 1: continuously adjustable between approx. 10 s and approx. 30 min. Channel 2: continuously adjustable between approx. 5 min and approx. 2 h. Colour: polar white.