Register to unlock your exclusive B2B prices. Register now
6225/1.0-914 Movement detector
In stock price (excl. VAT):
117,40 €
This price is valid until 2024-12-31
Price per pcs:
117,40 €
EAN: 4011395190364
MPN: 2CKA006220A0369
Our warehouse:
No
Vendor stock:
No
Per pallet:
N/A
Technical data
| Item condition | New |
| Manufacture name | 6225/1.0-914 Movement detector |
| Brand | Busch-Jaeger |
| Categories |
Sensors |
| Country of origin | DE |
| Harmonized System Code | 8536 5080 00 |
| Mounting method | Flush mounted (plaster) |
| Colour | White |
| Model | Movement sensor |
| Surface protection | Untreated |
| Creep-under protection | No |
| Number of channels | 1 |
| Staircase monitoring | No |
| Material quality | Thermoplastic |
| Switching power | 0 W |
| Max. transmission range frontally | 6 m |
| Max. transmission range sideways | 3 m |
| Bus system KNX | No |
| Bus system radio frequent | No |
| Bus system Powernet | No |
| With bus connection | Yes |
| Number of digital inputs | 0 |
| Material | Plastic |
| Other bus systems | free@home |
| Bus system LON | No |
| Diameter detection range on floor | 0 m |
| Substation input | No |
| RAL-number (similar) | 9010 |
| Teach-function for response value luminosity | No |
| Operation mode switch | No |
| Transparent | No |
| Animal zone | Yes |
| Surface finishing | Glossy |
| Detection angle vertical | 10 ° |
| Detection angle horizontal | 10-180 ° |
| Min. switch-on time | 30 s |
| Max. duty cycle | 0 min |
| Response value luminosity adjustable | Yes |
| Switch-off delay self-learning | No |
| Optimum mounting height | 1.2 m |
| Bus system KNX radio | No |
| Radio frequent bidirectional | No |
| Min. depth of built-in installation box | 0 mm |
| DALI-2 certified | - |
Packing details
| Packing level 1 | 4011395190364 |
Downloads
Description
Mit Selectlinse zur Erfassung mit Tierschneise. Zum automatischen Schalten von Busch-free@home® Aktoren in Abhängigkeit von Bewegung und Helligkeit. Nachlaufzeit des Aktors kann über das Web-Interface des System Access Points programmiert werden. Der Busanschluss erfolgt über die beiliegende Busklemme. Programmierung nur bei angelegter Busspannung über das Web-Interface des System Access Points. Weitere Informationen zur Inbetriebnahme und Bedienung finden Sie im Systemhandbuch und der Online Bedienungsanleitung im aktuellen Online-Katalog.