cartridge Cardew - type C - 660 V

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

122,52 €

This price is valid until 24.12.24

EAN: 3303430501725

MPN: 50172

Package: 1

Box: 24

Technical Information

Item condition	New
Manufacture name	cartridge Cardew - type C - 660 V
Brand	Schneider Electric
Categories	Lighting protection
Country of origin	FR
Mounting method	On basic element
With remote signalling contact	No
Number of conductors (without earthing)	1
Construction size	Other
Voltage protection level	1.6 kV
Max. continuous voltage AC	1000 V
Nominal discharge surge current (8/20)	40 kA
Nominal voltage AC	660 V
Nominal voltage DC	0 V
Voltage protection level L-N	1 kV
Signalling at the device	Optic
Max. continuous voltage DC	0 V
Degree of protection (IP)	Other
Max. PV-voltage	0 V
Voltage protection level N-PE	0.66 kV
Integrated backup fuse	No
Max. conductor cross section solid (solid, stranded)	150 mm²
Max. conductor cross section flexible (fine-strand)	0 mm²
System configuration DC	No
System configuration IT	Yes
System configuration TN	No
System configuration TN-C	No
System configuration TN-S	No
System configuration TT	No
System configuration other	No
System configuration TN-C-S	No
Max. discharge surge current (8/20)	40 kA
Short-circuit breaking capacity (Isccr)	40 kA
Max. overcurrent protection device, parallel connection (fuse)	0 A
Max. overcurrent protection device, series connection (fuse)	0 A
Integrated short-circuit protection selective to fuse gG	0 A

Packing details

Packing level 1	3303430501725
Packing level 2	3303430501723

Downloads

Technical manual

Description

This accessory belongs to the Vigilohm range designed to monitor ungrounded/IT electrical networks at feeder level, in accordance to installation and products standards. This part is a surge limiter used on IT networks, and installed as close as possible to the medium to low voltage transformer. They protect ungrounded networks from overvoltages that might be caused by transformer breackdown or lighting strikes. This Cardew C is to be installed on a monitored network of 660V AC to 1000V AC when connected between phase and neutral. Or 380V AC to 660V AC if the Cardew C is connected between two phases. It is recommended to monitor the cardew with an insulation fault locator such as the Vigilohm family IFL12. So that an insulation fault due to the cardew can be immediately identified, and its cartridge replaced. The dimensions of this limiter are 160mm in length, and 70mm in diameter, for a product weight of 1 kilogram.