Technical Information
Item condition |
New |
Manufacture name |
Shutters/Blinds actuator |
Brand |
EATON
|
Categories |
Sensors
|
Country of origin |
AT |
Harmonized System Code |
8541 4900 00
|
Mounting method |
Flush mounted (plaster) |
Type of current |
AC |
Number of inputs |
0 |
Bus system KNX |
No |
Bus system radio frequent |
Yes |
Bus system Powernet |
No |
Max. switching power |
1380 W |
With bus connection |
Yes |
Max. number of venetian-blind outputs |
1 |
Switching current (resistive) |
6 A |
Width in number of modular spacings |
3 |
Other bus systems |
xComfort |
Bus system LON |
No |
Local operation/hand operation |
Yes |
With switch function |
No |
Degree of protection (IP) |
IP20 |
With LED indication |
No |
Bus system KNX radio |
No |
Radio frequent bidirectional |
Yes |
Bus module detachable |
Yes |
Min. depth of built-in installation box |
26 mm |
Packing details
Packing level 1 |
4015082406967 |
Packing level 2 |
9007912841180 |
Description
Important!: This is a first generation Shutter actuator and we strongly recommend to use instead the latest generation slim Shutter actuator (CJAU-01/04) which has a low stand-by power and that is also available with local inputs (CJAUE-01/04-I) and as plug-type (CJAE-01/01). The Shutter actuator receives and actuates blinds and blind drives with 230V motors with integrated end position switch. In this blind actuator, 2 safety functions are possible (e.g., safety position during wind and / or rain. Lock-out protection - when the terrace door is open this roller blind / blind must not close). note: several shading motors must not be switched parallel on one blind actuator without having an isolator relay. The supply is carried out via the mains. the device is mounted in the switch or junction box. When using with inductive loads (e.g., fluorescent lamps), observe the suppressor circuit in all cases!