Register to unlock your exclusive B2B prices and start shopping. Sign up now!
DEHNguard S surge arrester Type 2 single-pole Uc 48V AC
In stock: No
Vendor stock: No
Minimal order quantity: 1
Not Available
Technical Information
| Item condition | New |
| Manufacture name | DEHNguard S surge arrester Type 2 single-pole Uc 48V AC |
| Brand | Dehn |
| Country of origin | DE |
| Harmonized System Code | 8536 3030 00 |
| Mounting method | DIN rail (top hat rail) 35 mm |
| Number of conductors (without earthing) | 1 |
| Construction size | 1 modular spacing |
| Voltage protection level | 0.33 kV |
| Max. continuous voltage AC | 48 V |
| Nominal discharge surge current (8/20) | 7.5 kA |
| Nominal voltage AC | 42 V |
| Category type 2 | Yes |
| Signalling at the device | Optic |
| Max. continuous voltage DC | 60 V |
| Degree of protection (IP) | IP20 |
| Max. conductor cross section solid (solid, stranded) | 35 mm² |
| Max. conductor cross section flexible (fine-strand) | 25 mm² |
| System configuration IT | No |
| System configuration TN | Yes |
| System configuration TN-C | Yes |
| System configuration TN-S | Yes |
| System configuration TT | Yes |
| System configuration TN-C-S | Yes |
| Max. discharge surge current (8/20) | 25 kA |
| Short-circuit breaking capacity (Isccr) | 50 kA |
| Max. overcurrent protection device, parallel connection (fuse) | 125 A |
| Max. overcurrent protection device, series connection (fuse) | 100 A |
Packing details
| Packing level 1 | 4013364119468, 4013364119468 |
Downloads
Description
Single-pole DEHNguard S surge arrester (type 2 according to EN 61643-11) consisting of a base part and plug-in protection module. High reliability due to Thermo Dynamic Contro" SPD monitoring device. For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher.
