electronic overload relay for motor TeSys - 1.2...7 A - 200...240 V AC

In stock price (excl. VAT):

48,21 €

This price is valid until 2024-12-24

Price per m: 48,21 €

EAN: 3389110575842

MPN: LR97D07M7

Our warehouse: No Vendor stock: No

Per package: 1 Per box: 24 Per pallet: 384

Technical data

Item condition	New
Manufacture name	electronic overload relay for motor TeSys - 1.2...7 A - 200...240 V AC
Brand	Schneider Electric
Categories	Control gear
Country of origin	KR
Harmonized System Code	8536 4900 99
Mounting method	Direct attachment
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as normally closed contact	0
Number of auxiliary contacts as change-over contact	1
Rated control supply voltage at AC 50 Hz	200-240 V
Rated control supply voltage at AC 60 Hz	200-240 V
Release class	Adjustable
Type of electrical connection of main circuit	Screw connection
Adjustable current range	1.2-7 A
Voltage type for actuating	AC
Reset function input	Yes
Reset function automatic	Yes
Reset function push-button	Yes

Packing details

Packing level 1	3389110575842
Packing level 2	3389110575840
Packing level 3	3389110575842

Downloads

Declaration EPD (Environmental Product Declaration) Instructions for use Technical manual Others Mounting instruction

Description

TeSys LR97D electronic overcurrent relay, 7A/690V, to be supplied with 200-240V AC, for protection of motors with a rated current 1.2-6A. It provides 3 dials to adjust the protection, LOAD (1.2-7A) for the overcurrent level, O-TIME (0.3-10sec) for the acceptable duration of the overcurrent, D-TIME (0.5-30sec) for the starting duration. In addition, the device trips when the current is higher than 3 x LOAD during more than 0.5sec in steady state and if there is a missing phase during more than 3sec. Settings also include selectors for 1-phase/3-phase motors and manual/automatic reset, the device has a reset button, a test/stop button, 2 LED indicators (Run/Trip), 2 auxiliary contacts 1NO/NC for fault signaling. Settings can be locked by sealing the transparent cover. For direct attachment to the bottom terminals of a 3-phase contactor LC1D09-D38, with screw clamp terminals on bottom, the separate mounting from the contactor is possible using the terminal block LAD7B106 (to be ordered separately). Multi-standards certified (IEC, UL, CSA, CCC, EAC), compliant RoHs/Reach.