Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Switching relay, 1 NO contact + 1 NC contact 16A
In stock: No
Vendor stock: No
Minimal order quantity: 1
Price (excl. VAT):
36,64 €
EAN: 4010312205440
MPN: 22110002
Package: 1
Technical Information
| Item condition | New |
| Manufacture name | Switching relay, 1 NO contact + 1 NC contact 16A |
| Brand | ELTAKO |
| Categories |
Relays |
| Country of origin | CN |
| Harmonized System Code | 8536 4900 00 |
| Mounting method | DIN rail |
| Function | Partially electronic |
| Built-in depth | 58 mm |
| Rated current | 16 A |
| Width in number of modular spacings | 1 |
| Control voltage 1 | 8-230 V |
| Type of control voltage 1 | AC/DC |
| Frequency control voltage 1 | 50 Hz |
| Voltage type of supply voltage | AC |
| Supply voltage | 250 V |
| Max. switching current (cos phi = 0.6) | 4 A |
| Max. incandescent lamp load | 2000 W |
| Max. load fluorescent lamp | 1000 VA |
| Max. load fluorescent lamp (Duo circuit) | 1000 VA |
| Max. load fluorescent lamp (parallel compensated) | 500 VA |
| Number of contacts as normally closed contact | 1 |
| Number of contacts as normally open contact | 1 |
| Number of contacts as change-over contact | 0 |
Packing details
| Packing level 1 | 4010312205440, 4010312205440 |
| Packing level 2 | 4010312205440 |
| Packing level 3 | 4010312205440 |
Downloads
Description
1 NO + 1 NC contact potential free 16A/250V AC. 230V LED lamps up to 200W, incandescent lamp load 2000W. No standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Universal control voltage 8 to 230V UC. Very low switching noise. Contact position indicator with LED. Same terminal connection as electromechanical switching relay R12-110-. By using a bistable relay coil power loss and heating is avoided even in the on mode. The relay contact can be open or closed when putting into operation. It will be synchronised at first operation. This relay is not suitable to feed back the switching voltage signal of a dimmer switch. Use only relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC for this purpose. The electronics does not have an internal power supply and therefore no standby loss. The microcontroller is activated when the control contact closes. This switches the bistable relay to the correct direction. The bistable relay switches back either when the control contact opens or when the control voltage falls.