Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Impulse switch for installation in lighting fittings, 1 NO contact 10A image 1

Impulse switch for installation in lighting fittings, 1 NO contact 10A

In stock: No Vendor stock: No Minimal order quantity: 1
Price (excl. VAT):
39,13 €
This price is valid until 31.12.24
EAN: 4010312101063
MPN: 60100055
Package: 1

Technical Information

Item condition New
Manufacture name Impulse switch for installation in lighting fittings, 1 NO contact 10A
Brand ELTAKO
Categories Relays
Country of origin CN
Harmonized System Code 8536 5080 00
Mounting method Other
Function Other
Built-in depth 28 mm
Width in number of modular spacings 2.22
Control voltage 1 12-24 V
Type of control voltage 1 AC/DC
Suitable for manual operation No
Voltage type of supply voltage AC
Supply voltage 250 V
Max. incandescent lamp load 500 W
Max. load fluorescent lamp (Duo circuit) 1000 VA
Rated switch current 10 A
Number of contacts as normally closed contact 0
Number of contacts as normally open contact 1
Number of contacts as change-over contact 0

Packing details

Packing level 1 4010312101063, 4010312101063
Packing level 2 4010312101063
Packing level 3 4010312101063

Downloads

Description

For installation in lighting fittings. 1 NO contact not potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamp load up to 500W. Standby loss 1 watt only. Built-in device for installation. 85mm long, 40mm wide, 28mm deep. With integrated transformer to galvanically separate the control circuit from the switching circuit to comply with the ­requirements for safety extra low voltage (SELV) to EN 60669-2-2. As of production week 18/18, compliance is fulfilled with the safety requirements of 2x MOPP to EN 60601-1. Activation by internal voltage or external control voltage of 12 to 24V UC, control current 10mA at 24V. Continuous power supply 230V. A circuit breaker of max. 10A is required. Incandescent lamps and halogen lamps load up to 500W1) and fluorescent lamps with conventional ballast units in lead-lag circuit up to 1000VA. Fluorescent lamps with conventional ballast units parallel compensated 300VA. Temperatures at the mounting location between -20°C and +50°C. Min. command pulse duration/command pause 20/300ms. Connections on the low voltage side: 4-pole pin receptacle for STOCKO MKF 13264-6-0-404 plug, 230V connections: 6-pole terminal strip with plug-in terminals. max. conductor cross section 2.5mm2. One STOCKO plug comes with each device. 1) For lamps with 150W max.