Floor standing distribution board, IP55, HxWxD=2060x800x400mm

In stock price (excl. VAT):

740,76 €

This price is valid until 2024-12-31

Price per m: 740,76 €

EAN: 9010238008663

MPN: 193214

Our warehouse: No Vendor stock: No

Per package: 1 Per box: N/A

Technical data

Item condition	New
Manufacture name	Floor standing distribution board, IP55, HxWxD=2060x800x400mm
Brand	EATON
Categories	Electric box (breaker panel)
Country of origin	CZ
Harmonized System Code	8538 1000 00
Colour	Grey
Width	800 mm
Height	2060 mm
Depth	400 mm
RAL-number	7035
With mounting plate	No
Number of doors	1
Number of locks	0
Suitable for wall mounting	Yes
EMC-version	Yes
With glazed door	No
Connectable	Yes
Material quality	Other
Material	Steel
Impact strength	IK10
Degree of protection (IP)	IP55
Suitable for outdoor set-up	No
Suitable for metrical mounting	Yes
Mounting plate depth-adjustable	Yes
With ventilation door	No
Surface finishing	Powder coating
With rear door	No
Suitable for wall built-in	No
Pitched roof	No
Pole fastening	No
Degree of protection (NEMA)	Other
Thermal dissipation (Delta T = 20 K) according to IEC/TR 60890	0 W
Max. permissible load of the enclosure according to IEC 62208	0 N
Max. permissible load of the door(s) according to IEC 62208	0 N
Max. permissible load of the mounting plate according to IEC 62208	0 N
Floor standing wall model	No
Detached	Yes
Corner model	No
Intermediate mounting	No

Packing details

Packing level 1

9010238008663

Description

Floor standing distribution board for damp locations with three-point rod lock and rotary lever, can be grouped, Large side flange, IP55, BPM-F-...; width 800mm, Outside height 2060 mm, Front plate height 1950 mm, Depth 400 mm; welded enclosure; earthed metal covers, extraordinary stability as a result of welded construction; well-structured, multilayered design for easily accessible installation: base frame - DIN-rails ... - enclosure; door can be right-hand or left-hand door; ample wiring area; open cable entries on top and bottom , prepared for F3A gland plate insert; variable interior fittings with/without removable mounting frame; indoor installation with MSW or mounting towers possible, if using an MSW assembly configuration, 2 pairs of BPZ-CTS-S corner towers and 1 BPZ-SNAP-MSW-CTS snap fitting elements will be additionally required; if using a base frame assembly configuration, 2 BPZ-FPS front plate supports will be additionally required; gray, RAL 7035