Technical Information
Item condition |
New |
Manufacture name |
RS485 bus telegram duplicator |
Brand |
ELTAKO
|
Categories |
Sensors
|
Country of origin |
CN |
Harmonized System Code |
8526 9200 00
|
Mounting method |
DRA (DIN-rail adapter) |
Number of inputs |
60 |
Number of outputs |
60 |
Bus system KNX |
No |
Bus system radio frequent |
Yes |
Bus system Powernet |
No |
With bus connection |
Yes |
Width in number of modular spacings |
1 |
Other bus systems |
Other |
Bus system LON |
No |
Local operation/hand operation |
No |
Degree of protection (IP) |
IP20 |
Bus system KNX radio |
No |
Packing details
Packing level 1 |
4010312315705, 4010312315705 |
Packing level 2 |
4010312315705 |
Packing level 3 |
4010312315705 |
Downloads
Description
Telegram duplicator for the Eltako RS485 bus with exchangeable antenna. Only 0.5 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. The telegrams of taught-in IDs are duplicated and directly sent into the Eltako wireless network with a new output ID. These wireless telegrams can be specifically taught-in in decentralized actuators. A total of 120 memory locations are available. The upper rotary switch is used to selectively transmitting a wireless telegram. In normal operation, it is set to RUN. The bottom rotary switch is used for teaching-in and deleting IDs. In normal operation, it is set to RUN. The red LED below the upper rotary switch performs during the teaching-in process. The green LED below the lower rotary switch lights up briefly when a wireless telegram is transmitted. The enclosed small antenna can be replaced with a wireless antenna FAG55E- or FA250 with magnetic base and cable.