Wireless actuator universal dimmer switch

Item condition	New
Manufacture name	Wireless actuator universal dimmer switch
Brand	ELTAKO
Categories	Switches
Country of origin	CN
Harmonized System Code	8526 9200 00
Mounting method	Other
Colour	White
Halogen free	Yes
Surface protection	Other
Current supply	230 V AC
Suitable for switch	No
Suitable for pulse button	No
Suitable for dimmer	Yes
Suitable for roller shutter switch	No
Material quality	Thermoplastic
Material	Plastic
Type of fastening	Other
Rolling code system	Yes
Number of commands	32
Radio frequency	868 MHz
In housing	Yes
In tube base housing	No
Printed circuit board/module	No
Push button mode	Yes
Switching mode	No
With manual radio transmitter	No
With radio coding device	No
With radio controlled push button	No
Suitable for venetian-/roller shutter switch	No
Suitable for venetian shutter switch	No
Transparent	No
Surface finishing	Matt
Suitable for degree of protection (IP)	IP20
IFTTT support available	No
Compatible with Apple HomeKit	No
Compatible with Google Assistant	No
Compatible with Amazon Alexa	No

Packing level 1	4010312316207, 4010312316207
Packing level 2	4010312316207

Universal dimmer switch, power MOSFET up to 400W. Automatic lamp detection. With adjustable minimum brightness and dimming speed. With switching operation for light alarm clocks, children's rooms and snooze function as well as constant light regulation and master-slave mode. Also with light scene control by PC or wireless pushbuttons. Encrypted wireless, bidirectional wireless and repeater function are switchable. Only 0.7 watt standby loss. Mounting in the 230V power supply cord, e.g. in false ceilings and lamps. 166mm long, 46mm wide and 31mm high. With cable fixation. Universal dimmer switch for lamps up to 400W, depending on ventilation conditions. Dimmable 230V LED lamps and dimmable energy saving lamps ESL, additionally depending on the lamps electronics and the dimming technology. Zero passage switching with soft ON and soft OFF to protect lamps. The brightness level is stored on switch-off (memory). In case of a power failure the switch ­position and the brightness stage are stored and may be switched on when the power supply is restored. Automatic electronic overload protection and overtemperature switch-off. Encrypted sensors can be taught in. You can switch on bidirectional wireless and/or a repeater function. Every change in state and incoming central command telegrams are confirmed by a wireless telegram. This wireless telegram can be taught-in in other actuators and Professional Smart Home controllers. The current dimming value is also displayed in % in the Professional Smart Home controller. The upper rotary switch determines the operation, whether automatic lamp detection or special comfort positions should work: AUTO allows the dimming of all lamp types. LC1 is a comfort position for dimmable 230V LED lamps, which by design won't be dimmed down enough in the AUTO position (trailing phase angle) and therefore has to be forced to leading phase angle. LC2 and LC3 are comfort positions for dimmable 230V LED lamps like LC1 but with different dimming curves. EC1 is a comfort position for energy saving lamps, which which by design must be turned on with an increased voltage so that they switch on again in cold state when dimmed down. EC2 is a comfort position for energy saving lamps, which by design won’t switch on again when dimmed down. Therefore Memory is switched off in this position. In positions LC1, LC2, LC3, EC1 and EC2 inductive (wound) transformers may not be used. In addition, the maximum number of dimmable LED lamps may be lower by design than in the AUTO position. LC4, LC5 and LC6 are comfort positions for LED lamps like AUTO but with different dimming curves. PCT is a position for special functions which were set up using the PCT14 PC Tool. The PCT14 link is hooked up using the data transformer DAT71. The minimum brightness (fully dimmed down) is adjustable with the middle %lamp rotary switch. The dimming speed is adjustable using the lower dimming speed rotary switch. The pushbuttons can be either taught-in as direction pushbuttons or universal pushbuttons: As direction pushbutton switch on and dim up is on one side and switch off and dim down on the other side. A double-click on the switch on side triggers the automatic dimming up to full brightness with dim speed time. A double-click on the switch off side triggers the snooze function. The children's room function is triggered on the switch on side. As a universal pushbutton the direction change is made by briefly releasing the pushbutton. For light scene control, constant light regulation, master-slave mode, light alarm clocks, children's rooms and snooze function see operating instructions. A resettable staircase time switch function with RV = 2 minutes can be called by a pushbutton taught-in as a staircase pushbutton. Brightness level settings can be called during teach-in with single light scene pushbuttons. A twilight pushbutton can be implemented using a taught-in FAH. Switch-on can be performed dependent on motion and brightness with up to 4 FBH devices. The LED accompanies the teach-in process and indicates control commands in operation by flashing briefly.