Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Coupling relay, 1 NO contact 16A image 1
ELTAKO

Coupling relay, 1 NO contact 16A

In stock: No Vendor stock: No Minimal order quantity: 1
Price (excl. VAT):
45,05 €
This price is valid until 31.12.24
EAN: 4010312206683
MPN: 22100800
Package: 1

Technical Information

Item condition New
Manufacture name Coupling relay, 1 NO contact 16A
Brand ELTAKO
Categories Relays
Country of origin CN
Harmonized System Code 8536 4900 00
Mounting method DIN rail
Function Partially electronic
Built-in depth 58 mm
Rated current 16 A
Width in number of modular spacings 1
Control voltage 1 8-230 V
Type of control voltage 1 AC/DC
Frequency control voltage 1 50 Hz
Max. switching current (cos phi = 0.6) 4 A
Max. incandescent lamp load 2000 W
Max. load fluorescent lamp 1000 VA
Max. load fluorescent lamp (Duo circuit) 1000 VA
Max. load fluorescent lamp (parallel compensated) 500 VA
Number of contacts as normally closed contact 0
Number of contacts as normally open contact 1
Number of contacts as change-over contact 0

Packing details

Packing level 1 4010312206683, 4010312206683
Packing level 2 4010312206683
Packing level 3 4010312206683

Downloads

Deep link product page

Description

1 NO contact potential free 16A/250V AC with tungsten pre-contact, max. inrush current 500A/2ms. 230V LED lamps up to 600W, incandescent lamp load 3300W. No standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. With the patented Eltako Duplex technology (DX) the normally potential-free contacts can still switch in zero passage when switching 230V AC 50Hz and therefore drastically reduce wear. Simply connect the neutral conductor to the terminal (N) and L to 1(L) for this. This gives an standby consumption of only 0.1 watt. If the contact is used for controlling switching devices which do not perform zero passage switching themselves, (N) should not be connected because the additional closing delay otherwise causes the opposite effect. Universal control voltage 8 to 230 V UC. Low switching noise. Contact position indicator with LED. By using a bistable relay coil power loss and heating is avoided even in the on mode. The relay contact can be open or closed when putting into operation. It will be synchronised at first operation. This relay is not suitable to feed back the switching voltage signal of a dimmer switch. Use only relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC for this purpose. The electronics does not have an internal power supply and therefore no standby loss. The microcontroller is activated when the control contact closes. This switches the bistable relay to the correct direction. The bistable relay switches back either when the control contact opens or when the control voltage falls.