SINAMICS G120 POWER MODULE PM250 WI...

Item condition	New
Manufacture name	SINAMICS G120 POWER MODULE PM250 WI...
Brand	Siemens
Categories	Control gear
Country of origin	DE
Harmonized System Code	8504 4088 00
Width	350 mm
Height	634 mm
Depth	316 mm
With control element	-
Number of digital inputs	UN
Number of digital outputs	UN
Number of analogue inputs	UN
Number of analogue outputs	UN
Supporting protocol for LON	-
Number of HW-interfaces industrial Ethernet	UN
Number of HW-interfaces RS-232	UN
Number of HW-interfaces RS-422	UN
Number of HW-interfaces RS-485	UN
Number of HW-interfaces serial TTY	UN
Number of HW-interfaces USB	UN
Number of HW-interfaces parallel	UN
Number of HW-interfaces other	UN
With optical interface	-
Supporting protocol for TCP/IP	-
Supporting protocol for ASI	-
Supporting protocol for PROFIBUS	-
Supporting protocol for CAN	-
Supporting protocol for INTERBUS	-
Supporting protocol for KNX	-
Supporting protocol for Modbus	-
Supporting protocol for Data-Highway	-
Supporting protocol for DeviceNet	-
Supporting protocol for SUCONET	-
Supporting protocol for other bus systems	-
Degree of protection (IP)	IP20
With PC connection	-
Supporting protocol for SERCOS	-
Supporting protocol for INTERBUS-Safety	-
Mains voltage	380-480 V
4-quadrant operation possible	Yes
Number of interfaces PROFINET	UN
Type of converter	U converter
Number of phases output	3
Number of phases input	3
Integrated breaking resistance	No
Application in industrial area permitted	No
Application in domestic- and commercial area permitted	No
Max. output frequency	550 Hz
Max. output at linear load at rated output voltage	55 kW
Max. output at quadratic load at rated output voltage	75 kW
Relative symmetric net voltage tolerance	-10 %
Relative symmetric net frequency tolerance	5 %
Supporting protocol for AS-Interface Safety at Work	-
Supporting protocol for DeviceNet Safety	-
Supporting protocol for EtherNet/IP	-
Supporting protocol for Foundation Fieldbus	-
Supporting protocol for PROFINET CBA	-
Supporting protocol for PROFINET IO	-
Supporting protocol for PROFIsafe	-
Supporting protocol for SafetyBUS p	-
Max. output voltage	UN V
Nominal output current I2N	145 A
Supporting protocol for BACnet	-

Packing level 1

4019169457965

SINAMICS G120 POWER MODULE PM250 WITHOUT FILTER POSSIBILITY OF REGENERATION 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 55KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP 0 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 75KW FOR 150% 3S,110% 57S,100% 240S AMBIENT TEMP 0 TO +40 DEG C 634 X 350 X 316 (HXWXD), FSF PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP Power Module SINAMICS PM250 Power Module with degree of protection IP20 for the SINAMICS G120 modular frequency converter. The Power Modules are suitable for numerous applications in general machine manufacturing. Any braking energy that occurs is fed directly back into the supply system (four-quadrant applications - no braking chopper required). The PM250 Power Module contains a worldwide unique technology, the Efficient Infeed Technology. With the regenerative capability implemented in this way, energy is fed back into the supply system in generator mode (electronic braking) and not dissipated in a braking resistor, which saves space in the cabinet. The work involved in dimensioning the braking resistor and the associated wiring is eliminated and the heat arising in the cabinet is also reduced. The innovative circuitry also reduces line harmonics and the use of an optional line reactor at the line input is unnecessary. This saves space and work in planning and procurement. The permissible cable lengths between the converter and the motor are limited. To be able to achieve longer cable lengths, output reactors can be connected. The PM250 Power Module is also suitable for use in safety-related applications. If combined with a failsafe control unit, the result is a Safety Integrated Drive. The PM250 Power Modules are available in a three-phase voltage range between 380 V and 480 V and in the frame sizes FSC to FSF. Frame sizes FSD to FSF are available both without and with an integrated Class A line filter. For frame size FSC with an integrated Class A line filter, there is an additional base filter to achieve Class B. The PM250 Power Modules with an integrated Class A line filter are suitable for connection to TN systems; those without an integrated line filter are suitable for connection to grounded TN/TT and ungrounded IT systems. Shield plates and shield connection kits are available for use when wiring the Control Units and Power Modules to ensure compliance with EMC guidelines. SINAMICS – simply my drive!