VZ208C Zone Valve, 2-Way, PN16, DN15, 15 mm O/D Compression, Kvs 0.6 m³/h, M30 Actuator Connection, 2.5 mm Stroke, Stem Up Closed

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

27,02 €

This price is valid until 24.12.24

EAN: 3606481518217

MPN: VZ208C-15BP03

Package: 1

Technical Information

Item condition	New
Manufacture name	VZ208C Zone Valve, 2-Way, PN16, DN15, 15 mm O/D Compression, Kvs 0.6 m³/h, M30 Actuator Connection, 2.5 mm Stroke, Stem Up Closed
Brand	Schneider Electric
Categories	Mounting materials
Country of origin	IT
Width	0 mm
Height	0 mm
Depth	0 mm
Surface protection	Other
Control signal	Two-point
Material quality	Other
Article compression class	PN 16
Max. medium temperature (continuous)	95 °C
Min. medium temperature (continuous)	5 °C
Outer pipe diameter all connections	15 mm
Flange compression class	PN 16
Length of connection 1	0 mm
Length of connection 2	0 mm
Working length connection 1	0 mm
Working length connection 2	0 mm
Operating time	0 s
With coupling connection 1	Yes
With coupling connection 2	Yes
Housing material	Brass
Kvs value	0.6
Connections	Compression ring
With end contacts	No
Max. electric power input	0 VA
Nominal diameter	1/2 inch (15)
Auxiliary contacts	No
Max. pressure difference in opened position	0 bar
Leakage loss of Kvs value	0 %
Control ratio (Svo)	50 %
Characteristic curve	Equal percentage
Closing pressure	0 bar

Packing details

Packing level 1

3606481518217

Downloads

ECOP (Environmental Code of Practice) Declaration EPD (Environmental Product Declaration) Technical manual

Description

The VZ28 is a short stroke and small linear zone valve designed for control of hot and chilled water. The valve is used with a thermo-electric actuators type MZ14. The valves utilise a double O-ring design on the plug to ensure a leak tight seal on both valve ports, this ensures no loss of energy leakage through the valve. 15mm Compression connection DN15, Kvs: .6 m³/h Two-way valve, Normally closed without actuator fitted. Pressure class PN16, stroke 2.5 mm. It is recommended to fit a strainer upstream of the valve to increase reliability and to follow water treatment guidelines as detailed in VDI 235. Valves should be installed in the return pipe to reduce exposure to media temperature extremes.