Technical Information
Item condition |
New |
Manufacture name |
BPS-Ö Blister-Pack |
Brand |
ELTAKO
|
Categories |
Switches
|
Country of origin |
CN |
Harmonized System Code |
8526 9200 00
|
Mounting method |
Other |
Halogen free |
Yes |
Surface protection |
Other |
Current supply |
230 V AC |
Number of relays |
1 |
Suitable for switch |
Yes |
Suitable for pulse button |
Yes |
Suitable for dimmer |
No |
Suitable for roller shutter switch |
No |
Material quality |
Thermoplastic |
Material |
Plastic |
Type of fastening |
Other |
Rolling code system |
Yes |
Number of commands |
32 |
Radio frequency |
868 MHz |
In housing |
Yes |
In tube base housing |
No |
Printed circuit board/module |
No |
Push button mode |
Yes |
Switching mode |
Yes |
With manual radio transmitter |
No |
With radio coding device |
No |
With radio controlled push button |
No |
Suitable for venetian-/roller shutter switch |
No |
Suitable for venetian shutter switch |
No |
Transparent |
No |
Suitable for degree of protection (IP) |
IP20 |
IFTTT support available |
No |
Compatible with Apple HomeKit |
No |
Compatible with Google Assistant |
No |
Compatible with Amazon Alexa |
No |
Packing details
Packing level 1 |
4010312314937, 4010312314937 |
Packing level 2 |
4010312314937 |
Description
Blisterpack switching with wireless pushbutton FT55R alpin white and wireless actuator impulse switch with integrated relay function FSR61-230V. Smart Home sensor and Smart Home actuator. FT55: Wireless pushbutton for busch reflex or duro frame. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. Wireless pushbuttons with one rocker can transmit two evaluable signals: press rocker up and press rocker down. The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on furniture using the enclosed adhesive foil. Use the sleeves in the 55mm socket box for screw mounting. FSR61-230V: Wireless actuator impulse switch with integrated relay function. 1 NO contact potential free 10A/250V AC, incandescent lamps up to 2000 watts, off delay with switch-off early warning and switchable pushbutton permanent light. Encrypted wireless, bidirectional wireless and repeater function are switchable. Only 0.8 watt standby loss. For installation. 45mm long, 45mm wide, 33mm deep. Supply voltage and control voltage locally 230V. If a power failure occurs, the switching state is retained. If a power failure occurs repeatedly, the device is switched off in a defined sequence. After installation, wait for short automatic synchronisation before the switched consumer is connected to the mains. In addition to the wireless control input via an internal antenna, this universal impulse switching relay can also be controlled locally by a conventional control switch if fitted previously. Glow lamp current is not permitted.