Current monitoring relay for IO-Lin...

In stock: No Vendor stock: Yes Minimal order quantity: 1

Price (excl. VAT):

155,38 € per pcs

This price is valid until 31.12.24

EAN: 4011209911710

MPN: 3RR2441-1AA40

Box: 1

Technical Information

Item condition	New
Manufacture name	Current monitoring relay for IO-Lin...
Brand	Siemens
Categories	Relays
Country of origin	CZ
Harmonized System Code	8536 4900 00
Width	45 mm
Height	79 mm
Depth	80 mm
Current measuring range	1.6-16 A
External current transformer	No
With detachable clamps	-
Single-phase hysteresis possible	No
Three-phase hysteresis possible	No
Single-phase under current possible	No
Three-phase under current possible	Yes
Single-phase overcurrent possible	No
Three-phase overcurrent possible	Yes
Contains function DC-voltage under current	No
Contains function DC-voltage overcurrent	No
Function DC-current hysteresis	No
Type of electric connection	Screw connection
Rated control supply voltage at AC 50 Hz	UN V
Rated control supply voltage at AC 60 Hz	UN V
Rated control supply voltage at DC	24 V
Max. permitted delay-on energization time	999.9 s
Min. adjustable delay-on energization time	0 s
Max. permitted off-delay time	999.9 s
Min. adjustable off-delay time	0 s
Voltage type for actuating	DC
Number of contacts as normally closed contact	UN
Number of contacts as normally open contact	UN
Number of contacts as change-over contact	UN

Packing details

Packing level 1

4011209911710

Description

Current monitoring relay for IO-Link, can be mounted to Contactor 3RT2, Size S00 Apparant/active current monitoring 1.6-16 A, 20-400 Hz, 3-phase Supply voltage 24 V DC 1 change-over contact Monitoring for Current overshoot and undershoot Current asymmetry Phase failure, Cable break Phase sequence, Residual current Blocking current, Switching cycle and Operating hours counter Warning and alarm thresholds Auto-reset or manual reset ON delay 0-9999.9 s OFF delay 0-9999.9 s Reclosing delay 0-300 min Screw connection system Monitoring relays SIRIUS 3RR2 for plugging into SIRIUS 3RT2 contactors or for stand-alone installation for multi-phase current monitoring of the entire plant or of the driven process. The reliable monitoring for cable break, phase failure / sequence, fault current, motor blocking etc. ensures increased plant availability. Actual value displays, status messages and clear error messages permit fast and reliable diagnostics. The connection to the control via IO-Link is also possible. You also save money, as only one device is needed to monitor a motor along the entire torque curve and no separate current converter is required either. Thanks to the direct attachment to the 3RT2 contactors there is no additional wiring expense in the main circuit. You also benefit from the wide-range power supplies for global use. Analogically adjustable, 2-phase versions and digitally adjustable, 3-phase versions (with or without IO-Link) are available, each in three sizes with different current measuring ranges, with two different supply voltages and two types of connection. Matching holders are available for the stand-alone installation of the 3RR2 monitoring relays. SIRIUS relays - one range for every application.