Switching relay, 2 CO contacts 16A
In stock price (excl. VAT):
41,14 €
This price is valid until 2024-12-31
Price per m:
41,14 €
EAN: 4010312205372
MPN: 22002601
Our warehouse:
No
Vendor stock:
No
Per package:
1
Per box:
1
Per pallet:
N/A
Technical data
| Item condition | New |
| Manufacture name | Switching relay, 2 CO contacts 16A |
| Brand | ELTAKO |
| Categories |
Relays |
| Country of origin | CN |
| Harmonized System Code | 8536 4900 00 |
| Mounting method | DIN rail |
| Function | Partially electronic |
| Built-in depth | 58 mm |
| Rated current | 16 A |
| Width in number of modular spacings | 1 |
| Control voltage 1 | 8-230 V |
| Type of control voltage 1 | AC/DC |
| Frequency control voltage 1 | 50 Hz |
| Voltage type of supply voltage | AC |
| Supply voltage | 250 V |
| Max. switching current (cos phi = 0.6) | 4 A |
| Max. incandescent lamp load | 2000 W |
| Max. load fluorescent lamp | 1000 VA |
| Max. load fluorescent lamp (Duo circuit) | 1000 VA |
| Max. load fluorescent lamp (parallel compensated) | 500 VA |
| Number of contacts as normally closed contact | 0 |
| Number of contacts as normally open contact | 0 |
| Number of contacts as change-over contact | 2 |
Packing details
| Packing level 1 | 4010312205372, 4010312205372 |
| Packing level 2 | 4010312205372 |
| Packing level 3 | 4010312205372 |
Downloads
Description
2 CO contacts potential free 16A/250V AC. 230V LED lamps up to 200W, incandescent lamp load 2000W. No standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Low switching noise. Contact position indicator with LED. Integrated free-wheeling anti-surge diode (A1 = +, A2 = -). By using a bistable relay coil power loss and heating is avoided even in the on mode. The relay contact can be open or closed when putting into operation. It will be synchronised at first operation. This relay is not suitable to feed back the switching voltage signal of a dimmer switch. Use only relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC for this purpose. The electronics does not have an internal power supply and therefore no standby loss. The microcontroller is activated when the control contact closes. This switches the bistable relay to the correct direction. The bistable relay switches back either when the control contact opens or when the control voltage falls.