Wireless DALI gateway

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

115,15 €

This price is valid until 31.12.24

EAN: 4010312317556

MPN: 30100867

Package: 1

Technical Information

Item condition	New
Manufacture name	Wireless DALI gateway
Brand	ELTAKO
Categories	Sensors
Country of origin	CN
Harmonized System Code	8526 9200 00
Mounting method	Other
Model	Multiple interface
Voltage type	AC
Power consumption	2 W
Bus system KNX	No
Bus system radio frequent	Yes
Bus system Powernet	No
Other bus systems	Other
Bus system LON	No
Demounting protection	No
Radio interface	No
IR interface	No
Protocol	Other
Provider dependent	No
Updateable	No
Visualization	No
Web-Server	No
Operating voltage	230 V
Degree of protection (IP)	IP20
With LED indication	Yes
Bus system KNX radio	No
Radio frequent bidirectional	Yes

Packing details

Packing level 1	4010312317556, 4010312317556
Packing level 2	4010312317556

Downloads

Deep link product page

Description

Wireless DALI gateway, bidirectional. 2 watt standby loss. Installation for example in suspended ceilings and lamps. 252mm long, 46mm wide and 31mm high. With cable fixation. Power supply 230V at terminals N and L. 16V DC/130mA can be connected to the DALI terminals +/- for up to 64 DALI devices. The gateway FDG71L controls DALI devices with EnOcean wireless transmitters. Groups 0-15 can be controlled and the broadcast command can be sent. In addition DALI scenes 0-15 can be controlled. DALI installations, which are to be fully controlled with the FDG71L, must be configured in groups 0-15. The FGD71L internally saves the dimming value for each of the groups 0-15 and supplies this value as feedback. The same feedback telegrams are generated as for an FUD71. The feedbacks of the device addresses correspond to the dimming values of the DALI groups 0-15 in ascending order. Feedbacks can be converted by the PCT14 for each individual group of dimming value telegrams (%) to pushbutton telegrams (ON/OFF). Feedbacks can then control actuators. The FGD71L fulfils the functions of the DALI master and the DALI power supply. Important: Wireless pushbuttons always need to be double-clicked when they are taught-in manually in the FDG71L. CLR only needs a single click. A direction pushbutton or universal pushbutton with identical ID and identical pushbutton can be taught in several times in different groups. The group last selected is always valid. Therefore, a pushbutton can either switch only one group or broadcast to all groups. One FBH per group can also be taught in. With a manual teach-in this always acts dependent on brightness. With PCT14 you can also set the brightness threshold. The delay time for switch-off after no motion is detected can be set together in minutes (1 ... 60) for the FBH devices of all groups. The default is 3 minutes.