Switching power supply unit 12V/12W

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

45,54 €

This price is valid until 31.12.24

EAN: 4010312315095

MPN: 30014062

Package: 1

Technical Information

Item condition	New
Manufacture name	Switching power supply unit 12V/12W
Brand	ELTAKO
Categories	Power supply elements and devices, reactive power compensation
Country of origin	CN
Harmonized System Code	8504 3180 00
Width	18 mm
Height	58 mm
Depth	58 mm
Voltage type of supply voltage	AC
Power output	12 W
Rail mounting possible	Yes
Wall mounting possible	No
1st secondary output voltage	12 V
Rated supply voltage at AC 50 Hz	230 V
Max. output current 1	1 A

Packing details

Packing level 1	4010312315095, 4010312315095
Packing level 2	4010312315095
Packing level 3	4010312315095

Other Technical data

Built-in width	18 mm
Modular version	Yes
Suitable for safety functions	-
Width in number of modular spacings	1
Output voltage stabilized	Yes
Type of electric connection	Screw connection
Stabilized	Yes
Degree of protection (IP)	IP20
Direct mounting possible	-
Secondary voltage adjustable	No
Short-circuit-proof	Yes
Nominal value output voltage 1	12 V

Downloads

Deep link product page

Description

Switching power supply unit rated capacity 12W. Standby loss 0.2 watt only. Modular devices for DIN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. If the total power demand of a Series 14 bus system is higher than 8W, other switching power supply units FSNT14-12V/12W are required. These are each supplying a group of actuators, which are separated with a disconnecting link on the FSNT14. The scope of delivery includes 1 disconnecting link TB14 1 module, 1 jumper 1.5 modules and a spacer DS14. At a load of more than 50% of the rated capacity and always if there are adjacent switching power supply units and dimmers a ventilation clearance of 1/2 module must be maintained with the spacers DS14. Therefore, this and a long jumper are included to the dimmers. Input voltage 230V (-20% bis +10%). Efficiency 83%. Stabilised output voltage ±1%, low residual ripple. Short-circuit proof. Overload protection and over-temperature switch-off by means of swichting off with automatic switching-on after fault clearance (autorecovery function). This switching power supply unit can also be used for producing a redundancy. Therefore only 1 FSNT14 should be plugged in parallel to the integrated power supply units into the FAM14 and FTS14KS and connected to a normal jumper. For an optimal load distribution, the FSNT14 should be placed as close as possible next to the last bus actuator.