Impulse switch with integr. relay function pure white

Item condition	New
Manufacture name	Impulse switch with integr. relay function pure white
Brand	ELTAKO
Categories	Switches
Country of origin	CN
Harmonized System Code	8526 9200 00
Mounting method	Other
Colour	White
Halogen free	Yes
Surface protection	Other
Current supply	230 V AC
Number of relays	1
Suitable for switch	Yes
Suitable for pulse button	Yes
Suitable for dimmer	No
Suitable for roller shutter switch	No
Material quality	Thermoplastic
Material	Other
Type of fastening	Other
Rolling code system	-
Number of commands	32
Radio frequency	868 MHz
In housing	Yes
In tube base housing	No
Printed circuit board/module	No
Push button mode	Yes
Switching mode	Yes
With manual radio transmitter	No
With radio coding device	No
With radio controlled push button	No
Suitable for venetian-/roller shutter switch	No
Suitable for venetian shutter switch	No
Transparent	No
Surface finishing	Matt
Suitable for degree of protection (IP)	IP20
IFTTT support available	No
Compatible with Apple HomeKit	No
Compatible with Google Assistant	No
Compatible with Amazon Alexa	No

Packing level 1	4010312301487, 4010312301487
Packing level 2	4010312301487

1 NO contact not potential free 10A/250V AC, 230V LED lamps up to 400W, incandescent lamps up to 2000 watts, energy saving lamps ESL up to 200W. Only 0.8 watt standby loss. Installation in the 230V power supply cord of standard lamps and bedside lights. 100mm long, 50mm wide and 31mm high. This wireless actuator is an impulse switch with integrated relay function and features state-of-the-art hybrid technology that we developed: we combined the wear-free receiver and evaluation electronics and a bistable relay with zero passage switching. By using a bistable relay coil power loss and heating is avoided even in the on mode. With the rotary switch on the side in the settings LRN up to 35 wireless pushbuttons can be assigned, of which one or more central control pushbuttons. In addition, wireless motion/brightness sensor FBH and/or a wireless outside brightness sensor FAH for a presence simulation. The required function of the impulse switch with integrated relay function can then be selected: ES = Impulse switch: After the FBH is taught-in, the device switches on when movement is detected and, after an additional FAH is taught-in, at twilight and when movement is detected. If no movement is detected, the contact opens after a 4 minute delay. A wireless switch can only be taught-in additionally to activate or deactivate presence simulation. ER = Switching relay. When FAH is taught-in, the device switches on at twilight. The contact opens after a 4 minute delay when brightness is detected. AS = Presence simulation. The AS starts with a random pause time of 20 to 40 minutes followed by a random switch-on time of 30 to 120 minutes. When the rotary switch is turned to AS or when the line voltage is switched on in AS position, the light switches on for 5 seconds after 1 second. When the FAH is taught-in, the AS only starts when twilight commences. After the FAH detects brightness, the AS ends after 4 minutes. The LED on the side below the left rotary switch accompanies the teach-in process as described in the operation manual. It indicates control commands by short flickering during operation.