Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Bus pushbutton coupler for 4 conventional pushbuttons image 1

Bus pushbutton coupler for 4 conventional pushbuttons

Vendor stock: No Minimal order quantity: 1
In stock price (excl. VAT):
46,76 €
This price is valid until 31.12.24
EAN: 4010312315668
MPN: 30014064
Package: 1

Technical Information

Item condition New
Manufacture name Bus pushbutton coupler for 4 conventional pushbuttons
Brand ELTAKO
Categories Sensors
Country of origin CN
Harmonized System Code 8526 9200 00
Mounting method Flush mounted (plaster)
Bus system KNX No
Bus system radio frequent Yes
Bus system Powernet No
Type of fastening Clamp mounting
Other bus systems Other
Bus system LON No
Degree of protection (IP) IP20
Number of actuation points 1
Bus system KNX radio No
Radio frequent bidirectional Yes
Min. depth of built-in installation box 18 mm

Packing details

Packing level 1 4010312315668, 4010312315668
Packing level 2 4010312315668
Packing level 3 4010312315668

Downloads

Description

Bus pushbutton coupler FTS61BTK for 4 conventional pushbuttons for connection to FTS14TG pushbutton gateways by 2-wire pushbutton bus. Only 0.2 watt standby loss. For installation. 45mm long, 45mm wide, 18mm deep. Up to 30 bus pushbuttons and/or bus pushbutton couplers FTS61BTK devices can be ­connected to the BP and BN terminals of a pushbutton gateway FTS14TG. The permitted total line length is 200m. The RLC device enclosed with the FTS14TG must also be connected to the terminals BP and BN on the bus switch or pushbutton bus coupler furthest away. A voltage of 29V DC is supplied to the connected FTS61BTK over a 2-wire pushbutton bus which is also used for data transfer. Please use only conventional bus or telephone lines. Up to four conventional pushbuttons can be connected to T1, T2, T3 and T4 by a maximum line length of 2 metres. Connect the opposite pole to the T0 terminal in each case. Caution: Do not apply any voltage. The pairs T1/T3 and T2/T4 can be defined as direction pushbuttons. Connect the bus to BP and BN. Make sure the polarity is correct.