Low-Voltage Fan Coil Room Controller: BACnet MS/TP, Analog 0-10 Vdc, Commercial/Override

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

336,30 €

This price is valid until 24.12.25

EAN: 0711426066951

MPN: SE7300F5045B

Package: 1

Technical Information

Item condition	New
Manufacture name	Low-Voltage Fan Coil Room Controller: BACnet MS/TP, Analog 0-10 Vdc, Commercial/Override
Brand	Schneider Electric
Categories	Sensors
Mounting method	Surface mounted (plaster)
Assembly arrangement	Control element
Colour	White
Surface protection	Untreated
With display	Yes
Material quality	Thermoplastic
Bus system KNX	No
Bus system radio frequent	No
Bus system Powernet	No
With bus connection	Yes
Material	Plastic
Other bus systems	Other
Bus system LON	No
With anti-theft/dismantling protection	Yes
Manual set point setting	Yes
Parallel-service possible	Yes
Presence button	Yes
RAL-number (similar)	9010
Degree of protection (IP)	IP20
With LED indication	Yes
Transparent	No
Surface finishing	Matt
With local operation	Yes
Bus system KNX radio	No
Radio frequent bidirectional	No
Class of the temperature control	VI
Standby power consumption (solstandby)	0 W
Min. depth of built-in installation box	0 mm

Packing details

Packing level 1

0711426066951

Downloads

ECOP (Environmental Code of Practice) Declaration EPD (Environmental Product Declaration)

Description

SE7300 Series room controllers are used for Low Voltage Fan Coil Unit control. The room controllers rated supply voltage range is 10V to 30V AC at 50 or 60Hz. The rated operational power is 2VA. The Electrical insulation class is Class II. The room controller is equiped with a communication port that uses BACnet MS/TP protocol. Its Room and Outdoor Air Temperature Display Range is between -40 and 122 oF. The measurement accuracy is +/- 0.9 oF at 70oF typical calibration. The temperature setting range is 40…90oF for heating and 54 to 100 oF for cooling. The room controller is equiped with 1 dry contact input, 2 universal analog outputs, with 0 to 10V DC at 5mA into 2 kOhm resistance. The product follows the following standards: ICES-003, UL 873, FCC part 15 subpart B, CSA C22.2 No 24 It is certified for C-Tick : AS/NZS CISPR 22, FCC : CFR 47 part 15 class A, UL listed file E27734 CCN XPAX, UL listed file E27734 CCN XPAX7, CE. The humidity setting range is 10 to 90% for humidification, and 15 to 95% for dehumidification. The ambient air temperature for operation is between 32 and 122 oF. The relative humidity for operating or storage is between 0 and 95% non condensing.