Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Off-delay timer, 1 NO contact 10A image 1

Off-delay timer, 1 NO contact 10A

Vendor stock: No Minimal order quantity: 1
In stock price (excl. VAT):
36,45 €
This price is valid until 31.12.24
EAN: 4010312603048
MPN: 61100704
Package: 1

Technical Information

Item condition New
Manufacture name Off-delay timer, 1 NO contact 10A
Brand ELTAKO
Categories Relays
Country of origin CN
Harmonized System Code 8536 5080 00
Mounting method Flush mounted (plaster)
Function Operating and release delay
Built-in height 18 mm
Width in number of modular spacings 0
Number of changeover switches 0
Control voltage 1 8-230 V
Type of control voltage 1 AC/DC
Frequency control voltage 1 50 Hz
Voltage type of supply voltage AC
Supply voltage 250 V
1st interval unit Minutes/hours
2nd interval unit Seconds/minutes
1st interval 0-12
2nd interval 1-12
Nominal switching current at 250 V AC 10 A
Switch capacity incandescent lamps 2000 W
Switch capacity fluorescent lamp DUO 1000 VA
Switch capacity fluorescent lamp parallel 500 VA
Number of contacts as normally closed contact 0
Number of contacts as normally open contact 1

Packing details

Packing level 1 4010312603048, 4010312603048
Packing level 2 4010312603048
Packing level 3 4010312603048

Downloads

Description

1 NO contact not potential free 10A/250V AC. Standby loss 0.7 watt only. Built-in device for installation. 45mm long, 45mm wide, 18mm deep. Zero passage switching to protect contacts and consumers. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. 8 to 230V UC universal control voltage, electrically isolated from the 230V supply voltage and switching voltage. By using a bistable relay coil power loss and heating is avoided even in the on mode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. The top rotary switch varies the off-delay time from 1 to 12 minutes. Operating delay settable from 0 to 12 minutes with the lower rotary switch. Function: When the control contact (light switch) is closed the operating delay AV starts (if not set 0 minutes), on time-out the fan is switched on. The set release delay RV (delay time) starts when the control contact opens and if a set operating delay has elapsed. The fan switches off on time-out. This off-delay timer can be controlled by all dimmer switches EUD12 and EUD61 even in the minimum dimming position.