Powerline dimmer actuator 1-10V

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

100,57 €

This price is valid until 31.12.24

EAN: 4010312316726

MPN: 31100006

Package: 1

Technical Information

Item condition	New
Manufacture name	Powerline dimmer actuator 1-10V
Brand	ELTAKO
Categories	Sensors
Country of origin	CN
Harmonized System Code	8526 9200 00
Mounting method	Flush mounted (plaster)
Model	Control module
Number of outputs	1
Bus system KNX	No
Bus system radio frequent	No
Bus system Powernet	Yes
With bus connection	Yes
Type of load	Universal
Voltage	230 V
Other bus systems	None
Bus system LON	No
Substation input	No
Parallel-service possible	Yes
Local operation/hand operation	Yes
Output power	600 W
With LED indication	Yes
Power boost suitable	-
Bus system KNX radio	No
Radio frequent bidirectional	Yes
Bus module detachable	No
Min. depth of built-in installation box	25 mm

Packing details

Packing level 1	4010312316726, 4010312316726
Packing level 2	4010312316726
Packing level 3	4010312316726

Downloads

Deep link product page

Description

Powerline dimmer actuator 1-10V. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. To switch and/or dim via a 1-10V interface. 1 NO non-floating contact 600VA. Standby loss only 0,5 watt. To activate and dim at different places. Current sink of max. 30mA for active and passive electronic ballasts. A Powerline sensor input is required for activation. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above it is a slide switch which has no function here. All entries and configurations can also be accessed via the mains using the PC software SIENNA Professional. Minimum and maximum brightness can be changed with SIENNA Professional. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm².