Powerline actuator 1 channel with sensor input 230V

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

92,79 €

This price is valid until 31.12.24

EAN: 4010312316665

MPN: 31100001

Package: 1

Technical Information

Item condition	New
Manufacture name	Powerline actuator 1 channel with sensor input 230V
Brand	ELTAKO
Categories	Sensors
Country of origin	CN
Harmonized System Code	8526 9200 00
Mounting method	Flush mounted (plaster)
Rated current	10 A
Output power	2000 W
Rated operating voltage	230 V
Bus system KNX	No
Bus system radio frequent	No
Bus system Powernet	Yes
Max. switching power	2000 W
With bus connection	Yes
Max. number of switching contacts	1
Max. switching current	10 A
Other bus systems	None
Bus system LON	No
Suitable for C-load	Yes
Different phases connectable	No
Local operation/hand operation	Yes
With LED indication	Yes
Modular expandability	No
Bus system KNX radio	No
Radio frequent bidirectional	No
Bus module detachable	No
Min. depth of built-in installation box	25 mm
Max. switching power LED	400 W

Packing details

Packing level 1	4010312316665, 4010312316665
Packing level 2	4010312316665
Packing level 3	4010312316665

Downloads

Deep link product page

Description

Powerline actuator with 1 channel with sensor input. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. Used as impulse switch or relay. 1 NO contact not potential free 10A/250V AC, incandescent lamps 2000 watts. Sensor input 230V. Standby loss only 0,5 watt. To control and switch at the same place. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above it is a slide switch which acts as a configuration switch with positions 0, 1 and 2. Position 0: Sensor input functions as pushbutton (impulse switch). Position 1: Sensor input functions as NO contact (relay). Position 2: A change-over switch is evaluated as a pushbutton. All entries and configurations can also be accessed via the mains using the PC software SIENNA Professional. This means that another configuration can also be set that is not available via the rotary switches: Position 3: Sensor input acts as NO contact (relay inverse). To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm².