pres.detec.Komfort KNX p.white

Item condition	New
Manufacture name	pres.detec.Komfort KNX p.white
Brand	Gira
Categories	Sensors
Country of origin	DE
Harmonized System Code	8536 5080 00
Mounting method	Surface mounted (plaster)
Colour	White
Model	Presence detector
Surface protection	Other
Creep-under protection	Yes
Number of channels	0
Staircase monitoring	Yes
Material quality	Other
Switching power	0 W
Max. transmission range frontally	0 m
Max. transmission range sideways	0 m
Bus system KNX	Yes
Bus system radio frequent	Yes
Bus system Powernet	No
With bus connection	Yes
Number of digital inputs	NA
Material	Other
Other bus systems	None
Bus system LON	No
Diameter detection range on floor	20 m
Substation input	Yes
RAL-number (similar)	9010
Teach-function for response value luminosity	Yes
Operation mode switch	No
Transparent	No
Animal zone	No
Detection angle vertical	360 °
Detection angle horizontal	NA °
Min. switch-on time	0 s
Max. duty cycle	0 min
Response value luminosity adjustable	Yes
Switch-off delay self-learning	Yes
Optimum mounting height	3 m
Bus system KNX radio	No
Radio frequent bidirectional	-
Min. depth of built-in installation box	0 mm
DALI-2 certified	-

Packing level 1

4010337084594

Presence detector Komfort for KNX pure white Presence detector for presence monitoring (operating mode: presence detector), for motion detection (operating mode: ceiling security light) or for monitoring with alarm telegrams (operating mode: alarm device) indoors. Features: Flush-mounted device with integrated KNX bus coupler. Programming LED button is visible and can be operated when installed if the ornamental ring is removed. PIR sensors: three sensors (crossed light paths), integrated brightness sensor. Adjuster for manual correction of sensitivity. Sensitivity is configurable. Sensitivity adjuster on the device can be deactivated using the software. Indication of motion detection (permanent or only during walking test). Separate evaluation in the long range of the three PIR sensors with 120 ranges of detection each with overlapping. Manual actuation using IR remote control. A maximum of 5+2 function blocks are configurable. Functions that can be set for each function block 1 to 5: ceiling security-light, presence detector, signal mode. Function block 6: presence detector with light control. Function block 7: brightness sensor with limit value monitoring. Function block changeover, e.g. for day night mode or weekday weekend operation. Function blocks 1 to 5: individual device, main unit, auxiliary unit can be set. Operating modes which can be set for individual device as a main unit: automatic, semi-automatic (manual ON automatic OFF, or automatic ON manual OFF). Two outputs per function block (1 to 5) for function ceiling security-light, presence detector. Functions of ceiling security-light, presence detector per output: switching, staircase function, switching with forced setting, dimming value transmitter, light scene auxiliary unit, temperature value transmitter, brightness value transmitter, temperature operating mode. Ceiling security light, presence detector: Twilight stage can be set via external communication object or per teach-in, additional transmission delay via external communication object, adaptive delay time (self-teaching additional transmission delay), short-term presence function, feedback of twilight stage, block function, manual operation using pushbutton sensor (separate communication object), switch-off brightness (for presence detectors) via teach-in, measurement of time period after last motion. Function of presence detector with light control: combination with function block of presence detector or individual device, setpoint value can be set, setpoint value specified via external communication object, setpoint offset via external communication object, teach-in function, feedback of the effective setpoint value. Function of brightness sensor with limit value monitoring: up to three limit values are configurable, functions of switching, dimming value transmitter, light scene auxiliary unit, configurable hysteresis, limit value via external communication object or teach-in, block function. Notes : The presence detector is not suitable for alarm messages in VdS-compliant alarm systems. Ceiling mounting on stable ceilings in device box or surface-mounted housing.