Technical Information
Item condition |
New |
Manufacture name |
Pulse-count input, 2-way |
Brand |
EATON
|
Categories |
Sensors
|
Country of origin |
CZ |
Harmonized System Code |
9028 3090 00
|
Mounting method |
Other |
Model |
Base module |
Number of inputs |
2 |
Bus system KNX |
No |
Bus system radio frequent |
Yes |
Bus system Powernet |
No |
With bus connection |
Yes |
Input current drive |
Yes |
Input voltage drive |
Yes |
Width in number of modular spacings |
2 |
Other bus systems |
xComfort |
Bus system LON |
No |
Degree of protection (IP) |
IP20 |
With LED indication |
Yes |
Bus system KNX radio |
No |
Min. depth of built-in installation box |
0 mm |
Packing details
Packing level 1 |
4015081169498 |
Packing level 2 |
9008790072031 |
Description
The pulse value input 2-fold is used to set that in order to record the consumption values of, e.g., electric, gas, water, etc. via a zmeter with standardized S0 interfacez and then subsequently transfer them for evaluation and displaying to the room-manager with zenergy management functionz. The supply is carried out via a separate 24VDC power supply unit (110772 or 110773, not included as standard!!!).the 24VDC supply is fed through 2-fold at the pulse input and is therefore available for supplying the meter (if required). Notice: only use S0 sensors and observe the correct wiring!!! The device is mounted in the junction or installation box. Attention!: Does not work with xComfort Bridge . Notice: only use S0 sensors and observe the correct wiring!!! The device is mounted in the junction or installation box.