Technical Information
Item condition |
New |
Manufacture name |
Room Controller Touch, signal white, gloss, with Legacy firmware for SHC and CSAU |
Brand |
EATON
|
Categories |
Sensors
|
Country of origin |
CZ |
Harmonized System Code |
8536 5011 00
|
Mounting method |
Surface mounted (plaster) |
Assembly arrangement |
Basic element with complete housing |
Colour |
White |
Surface protection |
Untreated |
With display |
Yes |
Material quality |
Thermoplastic |
Bus system KNX |
No |
Bus system radio frequent |
Yes |
Bus system Powernet |
No |
With bus connection |
Yes |
Number of digital inputs |
0 |
Material |
Plastic |
Other bus systems |
xComfort |
Bus system LON |
No |
With anti-theft/dismantling protection |
No |
Manual set point setting |
Yes |
Parallel-service possible |
Yes |
Presence button |
No |
RAL-number (similar) |
9003 |
Degree of protection (IP) |
IP20 |
With LED indication |
No |
Transparent |
No |
Surface finishing |
Glossy |
With local operation |
Yes |
Bus system KNX radio |
No |
Radio frequent bidirectional |
Yes |
Class of the temperature control |
IV |
Standby power consumption (solstandby) |
0.05 W |
Min. depth of built-in installation box |
0 mm |
External sensor |
Yes |
Packing details
Packing level 1 |
9010653030300 |
Packing level 2 |
9010238226333 |
Description
Room Controller Touch, signal white gloss, with temperature and humidity sensor is suitable to monitor and control the climate in a room either stand-a-lone or together with an intelligent device. The operation is done through the Touch display with backlight. The user programmable Week Program Timer and 4 Operation modes offer maximum flexibility to meet the specific needs. It supports floor temperature control via an optional external wired floor temperature sensor (PT1000). Two optional touch-buttons on the display are available to control other xComfort functions/actuators . The Room Controller Touch is compatible with many 55 mm frames from the switch industry (observe the compatibility list). The device is battery powered and NO switch, branch or installation box is required, therefore it can be easily mounted anywhere (screwed and glued). Battery included as standard, but it can also be powered with an optional mains power adapter.This Room Controller Touch is pre-programmed with the Legacy software that works with the xComfort SHC, Switching actuator and Heating actuator.