RS485 bus wireless actuator PWM dimmer switch for LED
In stock price (excl. VAT):
90,58 €
This price is valid until 2024-12-31
Price per m:
90,58 €
EAN: 4010312324097
MPN: 30014068
Our warehouse:
No
Vendor stock:
No
Per package:
1
Per box:
1
Per pallet:
N/A
Technical data
| Item condition | New |
| Manufacture name | RS485 bus wireless actuator PWM dimmer switch for LED |
| Brand | ELTAKO |
| Categories |
Sensors |
| Country of origin | CN |
| Harmonized System Code | 8526 9200 00 |
| Mounting method | DRA (DIN-rail adapter) |
| Model | Dimming actuator |
| Number of outputs | 4 |
| Bus system KNX | No |
| Bus system radio frequent | Yes |
| Bus system Powernet | No |
| With bus connection | No |
| Type of load | Capacitive |
| Voltage | 12-24 V |
| Width in number of modular spacings | 2 |
| Other bus systems | None |
| Bus system LON | No |
| Substation input | No |
| Parallel-service possible | No |
| Local operation/hand operation | Yes |
| Output power | 96 W |
| Degree of protection (IP) | IP20 |
| With LED indication | Yes |
| Power boost suitable | No |
| Bus system KNX radio | No |
| Radio frequent bidirectional | Yes |
| Bus module detachable | Yes |
| Max. switching power LED | 96 W |
Packing details
| Packing level 1 | 4010312324097, 4010312324097 |
| Packing level 2 | 4010312324097 |
Downloads
Description
PWM dimmer switch with 4 channels for LED 12-24V DC, each up to 4A. Adjustable minimum brightness and dimming speed. With snooze function and light alarm circuit. Additionally with light scene control via Professional Smart Home controller or with wireless pushbuttons. Standby loss only 0.1 watt. Modular device for DIN-EN 60715 TH35 rail mounting. 2 modules = 36mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. The set brightness level remains stored when switched off (memory). In case of a power failure, the switch position and brightness level are saved and switched on when the power supply is restored. Automatic electronic overload protection and overtemperature shutdown. The upper rotary switch is only required for teach-in. Use the middle % lamp rotary switch to set the minimum brightness (fully dimmed). Use the lower dimming speed rotary switch to set the dimming speed. The pushbuttons can either be taught in as direction pushbuttons or universal pushbuttons: as direction pushbutton, one side is switch on and dim up. the other side is switch off and dim down. Double-click on the switch-on side to trigger automatic dim up to full brightness at dimming speed. Double-click on the switch-off side to trigger the snooze function. As universal pushbutton, change the direction by briefly releasing the pushbutton. FHB wireless motion/brightness sensors can be taught in as master or slave. FAH wireless brightness sensors can be taught in for switch-off dependent on brightness or as a twilight switch. Light scene control, light alarm circuit and snooze function as described in the operating instructions. The LED accompanies the teach-in process as described in the operating instructions and indicates control commands by briefly flickering during operation.