Technical Information
Item condition |
New |
Manufacture name |
Bus pushbutton coupler for 8 conventional pushbuttons |
Brand |
ELTAKO
|
Categories |
Sensors
|
Country of origin |
CN |
Harmonized System Code |
8526 9200 00
|
Mounting method |
Flush mounted (plaster) |
Bus system KNX |
No |
Bus system radio frequent |
Yes |
Bus system Powernet |
No |
Type of fastening |
Clamp mounting |
Other bus systems |
Other |
Bus system LON |
No |
Degree of protection (IP) |
IP20 |
Number of actuation points |
1 |
Bus system KNX radio |
No |
Radio frequent bidirectional |
Yes |
Min. depth of built-in installation box |
18 mm |
Packing details
Packing level 1 |
4010312326015, 4010312326015 |
Packing level 2 |
4010312326015 |
Packing level 3 |
4010312326015 |
Downloads
Description
Bus pushbutton coupler FTS61BTK/8 for 8 conventional pushbuttons for connection to FTS14TG pushbutton gateways by 2-wire pushbutton bus. Only 0.2 watt standby loss. For installation. 45mm long, 45mm wide, 18mm deep. Up to 30 bus pushbuttons and/or bus pushbutton couplers FTS61BTK/8 devices can be connected to the BP and BN terminals of a pushbutton gateway FTS14TG. The permitted total line length is 200m. The RLC device enclosed with the FTS14TG must also be connected to the terminals BP and BN on the bus switch or pushbutton bus coupler furthest away. A voltage of 29V DC is supplied to the connected FTS61BTK/8 over a 2-wire pushbutton bus which is also used for data transfer. Please use only conventional bus or telephone lines. Up to four conventional pushbuttons T1-T4 can be connected to the 15cm long connecting cables. Each opposite pole is T0. The connecting cables can be extended up to 2m. Caution: Do not apply any voltage. The pairs T1/T3, T2/T4, T5/T7 and T6/T8 can be defined as direction pushbuttons. Connect the bus to BP and BN. Make sure the polarity is correct.