Powerline TLZ actuator 1 channel with sensor input 230V

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

94,43 €

This price is valid until 31.12.24

EAN: 4010312316702

MPN: 31100004

Package: 1

Technical Information

Item condition	New
Manufacture name	Powerline TLZ actuator 1 channel with sensor input 230V
Brand	ELTAKO
Categories	Sensors
Country of origin	CN
Harmonized System Code	8526 9200 00
Mounting method	Flush mounted (plaster)
Output power	2000 W
Bus system KNX	No
Bus system radio frequent	No
Bus system Powernet	Yes
Max. switching power	2000 W
With bus connection	Yes
Max. number of switching contacts	1
Max. switching current	10 A
Other bus systems	None
Bus system LON	No
Suitable for C-load	Yes
Different phases connectable	No
Local operation/hand operation	-
With LED indication	Yes
Modular expandability	No
Bus system KNX radio	No
Radio frequent bidirectional	-
Bus module detachable	No
Min. depth of built-in installation box	25 mm
Max. switching power LED	400 W

Packing details

Packing level 1	4010312316702, 4010312316702
Packing level 2	4010312316702
Packing level 3	4010312316702

Downloads

Deep link product page

Description

Powerline TLZ (staircase time switch) actuator with 1 channel. 53x43mm, 25mm deep for mounting in 58mm switch boxes. Off delay settable from 1 minute to 120 minutes. Switch-off early warning settable. 1 NO contact not potential free 10A/250V AC, incandescent lamps 2000 watts. Sensor input 230V. Standby loss only 0,5 watt. To control and switch at the same place. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the off-delay time. Above it is a slide switch which acts as a configuration switch with positions 0, 1 and 2. Position 0: Pushbutton at sensor input with subsequent switching. Position 1: Same as Position 0 but with switch-off early warning. Position 2: A change-over switch is evaluated as a pushbutton. All entries and configurations can also be accessed via the mains using the PC software SIENNA Professional. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm².