Self-learning mains disconnection relay, 1 NO contact 16A
In stock price (excl. VAT):
49,73 €
This price is valid until 2024-12-31
Price per m:
49,73 €
EAN: 4010312203255
MPN: 22100231
Our warehouse:
No
Vendor stock:
No
Per package:
1
Per box:
1
Per pallet:
N/A
Technical data
| Item condition | New |
| Manufacture name | Self-learning mains disconnection relay, 1 NO contact 16A |
| Brand | ELTAKO |
| Categories |
Relays |
| Country of origin | CN |
| Harmonized System Code | 8536 5080 00 |
| Mounting method | DIN rail |
| Built-in depth | 26 mm |
| Rated current | 10 A |
| Rated voltage | 230 V |
| Rated frequency | 50 Hz |
| Width in number of modular spacings | 3 |
| Engaging threshold current | 20 mA |
| Max. switching current (cos phi = 0.6) | 16 A |
| Max. incandescent lamp load | 2300 W |
| Max. load fluorescent lamp | 500 VA |
| Max. load fluorescent lamp (Duo circuit) | 1000 VA |
| Max. load fluorescent lamp (parallel compensated) | 500 VA |
| Degree of protection (IP) | IP20 |
| Monitoring voltage | DC |
Packing details
| Packing level 1 | 4010312203255, 4010312203255 |
| Packing level 2 | 4010312203255 |
| Packing level 3 | 4010312203255 |
Downloads
Description
1 NO contact not potential free 16A/250V AC. Self-learning. 230V LED lamps up to 200W, incandescent lamp load 2300W. Standby loss 0.8 watt only. Modular device for DIN EN 60715 TH35 rail mounting. 1 module = 18mm wide and 58mm deep. 230V supply voltage and switching voltage. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. The FR12-230V mains disconnection relay disconnects the power supply once all series connected loads are turned off, thus preventing any electromagnetic interference fields from occurring. Small loads up to 200mA, are acceptable and, once major loads are disconnected, they do not prevent field disconnection. The limit is taught-in automatically by the FR12 using a patented method so you need not set the limit manually. Loads drawing more than 200mA are consistently defined as loads which should cause the line power to be connected. As long as no major load is turned on, one pole of the monitored circuit remains isolated from the mains. Neutral and earth are connected continuously to avoid acting as an aerial. A DC voltage with an extremely low residual ripple is applied for monitoring. Therefore, it is prohibited to bridge the relay contact, which would ultimately cause device failure. When a load is turned on, the mains disconnection switch connects the monitored phase after approx. 1 sec and the LED lights red.