Powerline repeater

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

83,29 €

This price is valid until 31.12.24

EAN: 4010312324103

MPN: 31000030

Package: 1

Technical Information

Item condition	New
Manufacture name	Powerline repeater
Brand	ELTAKO
Categories	Sensors
Country of origin	CN
Harmonized System Code	8526 9200 00
Nominal voltage	230 V
Mounting method	Flush mounted (plaster)
Bus system KNX	No
Bus system radio frequent	No
Bus system Powernet	Yes
Other bus systems	None
Bus system LON	No
Degree of protection (IP)	IP20
Bus system KNX radio	No

Packing details

Packing level 1	4010312324103, 4010312324103
Packing level 2	4010312324103
Packing level 3	4010312324103

Downloads

Deep link product page

Description

Powerline repeater. 53x43mm, 25mm deep for mounting in 58mm switch boxes. Standby loss only 0,5 watt. The repeater supports greater ranges. With cable lengths of >300m the repeater is normally located in a distributor between the sensor and the actuator. The repeater repeats commands from sensors with the same address g, e. Feedback messages from actuators are not repeated. Two rotary switches are located on the front to assign addresses: The left-hand rotary switch determines the group address g with 16 alphanumeric digits from A to P. The right-hand rotary switch determines the element address e with 16 numerical values. Above it is a slide switch which is a configuration switch with positions 0, 1 and 2. Position 0: Central commands are repeated irrespective of the repeater’s e address. With address g, e=0, only central commands are repeated. Position 1: With address g, e=0 at the repeater, all commands of group g are repeated. Position 2: Unassigned. All entries and configurations can also be accessed via the mains using the Sienna Professional PC software. Addresses can be changed live or without voltage. On the left of the rotary switches is a red LED to display all activities. Next to that is the Reset button and to the right of that is Service Pin (P). The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm².